Author Title
Abbaszadeh, A. CFD SIMULATION OF GAS-SOLID FLOW IN A SPOUTED BED WITH A NON-POROUS DRAFT TUBE
Abdel-Jawad, M. CFD MODELLING OF A SUBTERRANEAN BUSBAR FOR THERMAL PERFORMANCE
Adema, A. COUPLED DEM - CFD MODELLING OF THE IRONMAKING BLAST FURNACE
Aichinger, G. COMPREHENSIVE DEM-DPM-CFD SIMULATIONS - MODEL SYNTHESIS, EXPERIMENTAL VALIDATION AND SCALABILITY
Alam, M. CFD SIMULATION OF SUPERSONIC OXYGEN JET BEHAVIOUR INSIDE A HIGH TEMPERATURE FIELD
Ali, M.S.M. GRID CONVERGENCE STUDY FOR A TWO-DIMENSIONAL SIMULATION OF FLOW AROUND A SQUARE CYLINDER AT A LOW REYNOLDS NUMBER
Al-Rashed, M.H. CFD SIMULATION OF A CONICAL-CYLINDRICAL CRYSTALLIZATION UNIT USING MULTI-PHASE EULERIAN MODEL
Alsairafi, A.A. CFD SIMULATION OF A CONICAL-CYLINDRICAL CRYSTALLIZATION UNIT USING MULTI-PHASE EULERIAN MODEL
Aminossadati, S.M. NUMERICAL ANALYSIS OF FLUID FLOW AND HEAT TRANSFER THROUGH REACTIVE COAL STOCKPILE
Anderson, B. NUMERICAL SIMULATIONS OF BUBBLE DISPERSION OVER A HYDROFOIL
Antiohos, A.A. CFD DESIGN OF A GENERIC CONTROLLER FOR VORTEX-INDUCED RESONANCE
Appleby, S. CFD MODELLING OF A SUBTERRANEAN BUSBAR FOR THERMAL PERFORMANCE
Ariff, M. WALL Y+ APPROACH FOR DEALING WITH TURBULENT FLOW OVER A SURFACE MOUNTED CUBE: PART 1 - LOW REYNOLDS NUMBER WALL Y+ APPROACH FOR DEALING WITH TURBULENT FLOW OVER A SURFACE MOUNTED CUBE: PART 2 - HIGH REYNOLDS NUMBER
Asimakopoulou, E. CO DISPERSION IN A CAR-REPAIR SHOP: AN EXPERIMENTAL AND CFD MODELLING STUDY
Back to Top
Bahri, P.A. INVESTIGATION OF LIQUID-LIQUID TWO PHASE FLOW IN BIODIESEL PRODUCTION
Ballusu, R. INERTISATION OF HIGHWALL MINING TO CONTROL METHANE CONCENTRATIONS AT THE MOURA MINE
Bandi, A. PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS
Bänsch, E. 2D SIMULATIONS OF INTERFACIAL INSTABILITIES AT DEFORMABLE SINGLE DROPLETS
Barber, J.O. COMPUTATIONAL SIMULATION OF RED BLOOD CELL MOTION IN MICROVESSEL BIFURCATIONS
Basu, B. CFD STUDY OF SLURRY HOMOGENIZER PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS
Bäumler, K. 2D SIMULATIONS OF INTERFACIAL INSTABILITIES AT DEFORMABLE SINGLE DROPLETS
Bhad, T.P. CFD MODELING OF A CEMENT KILN WITH MULTI CHANNEL BURNER FOR OPTIMIZATION OF FLAME PROFILE
Bhatelia, T.J. CHARACTERIZING LIQUID FILM THICKNESS IN SPINNING DISC REACTORS
Bhattacharya, S. DNS OF TURBULENT NON-NEWTONIAN FLOW IN AN OPEN CHANNEL
Biscombe, C.J.C. ELECTRO-OSMOTIC EFFECTS IN LOW REYNOLDS NUMBER FLOW THROUGH A PLANAR MICROFLUIDIC CONTRACTION-EXPANSION
Blackburn, H.M. STABILITY OF OSCILLATORY AND PULSATILE PIPE FLOW NUMERICAL SIMULATIONS OF BUBBLE DISPERSION OVER A HYDROFOIL
de Boer, K. INVESTIGATION OF LIQUID-LIQUID TWO PHASE FLOW IN BIODIESEL PRODUCTION
Boisvert, P. COMPUTATIONAL FLUID DYNAMICS MODEL OF ELECTRIC FURNACE FOR SMELTING NICKEL CALCINE
Boom, R. COUPLED DEM - CFD MODELLING OF THE IRONMAKING BLAST FURNACE
Boustead, N. SHORT-WAVE INSTABILITY GROWTH IN CLOSELY SPACED VORTEX PAIRS
Bremhorst, K. CFD MODELING OF ALUMINA SLURRY HEAT EXCHANGER HEADERS: (i) COMPARISON OF CFD APPROACHES CFD MODELING OF ALUMINA SLURRY HEAT EXCHANGER HEADERS: (ii) PARAMETRIC STUDIES
Brennan, M.S. CFD MODELLING OF HYDROCYCLONES: VALIDATION AGAINST PLANT HYDRODYNAMIC PERFORMANCE CFD MODELING OF ALUMINA SLURRY HEAT EXCHANGER HEADERS: (ii) PARAMETRIC STUDIES CFD MODELING OF ALUMINA SLURRY HEAT EXCHANGER HEADERS: (i) COMPARISON OF CFD APPROACHES
Brooks, G.A. CFD SIMULATION OF SUPERSONIC OXYGEN JET BEHAVIOUR INSIDE A HIGH TEMPERATURE FIELD
Buckow, R. NUMERICAL SIMULATION OF PULSED ELECTRIC FIELDS (PEF) PROCESSING FOR CHAMBER DESIGN AND OPTIMISATION
Bui, A. MULTISCALE MODELLING OF CEREBRAL BLOOD FLOW
Bürgler, T. SIMULATION OF OFFGAS SCRUBBING BY A COMBINED EULERIAN-LANGRANGIAN MODEL
Burström, P.E.C. CFD-MODELLING OF SELECTIVE NON-CATALYTIC REDUCTION OF NOx IN GRATE-KILN PLANTS
Butler, C.J. MODELLING VARIATIONS IN SHEAR-RATE AROUND A GEOMETRICALLY SIMILAR THROMBUS IN-VITRO
Back to Top
Campbell, A.P. CFD MODELLING OF A SUBTERRANEAN BUSBAR FOR THERMAL PERFORMANCE INVESTIGATION OF ELECTROSTATIC PRECIPITATOR CHAR COLLECTOR DESIGNS USING COMPUTATIONAL FLUID DYNAMICS
Cao, M. TWO-PHASE FLOW ANALYSIS AND EXPERIMENTAL INVESTIGATION OF MICRO-PIV FOR EMITTER MICRO-CHANNELS
Cattolica, R.J. CFD SIMULATION SCALE-UP OF A DUAL-FLUIDIZED BED GASIFIER FOR BIOMASS
Chaturvedi, P. PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS
Cheah, S.C. WALL Y+ APPROACH FOR DEALING WITH TURBULENT FLOW OVER A SURFACE MOUNTED CUBE: PART 1 - LOW REYNOLDS NUMBER WALL Y+ APPROACH FOR DEALING WITH TURBULENT FLOW OVER A SURFACE MOUNTED CUBE: PART 2 - HIGH REYNOLDS NUMBER
Chen, J. A CONCEPTUAL MODEL FOR GAS-LIQUID INTERACTION AND ITS INTEGRATION INTO CFD SIMULATION OF BUBBLE COLUMNS
Cheung, S.C.P. DIRECT QUADRATURE METHOD OF MOMENTS FOR ISOTHERMAL BUBBLY FLOWS AN OVERALL ASSESSMENT OF ABND MODEL FOR LARGE-SCALE BUBBLY FLOWS INFLUENCE OF DRAG FORCES OF A SWARM OF BUBBLES IN ISOTHERMAL BUBBLY FLOW CONDITIONS
Chui, E. COMPUTATIONAL FLUID DYNAMICS MODEL OF ELECTRIC FURNACE FOR SMELTING NICKEL CALCINE
Choi, H.S. NUMERICAL SIMULATION FOR FAST PYROLYSIS OF WOODY BIOMASS IN A BUBBLING FLUIDISED BED REACTOR
Choi, Y.S. NUMERICAL SIMULATION FOR FAST PYROLYSIS OF WOODY BIOMASS IN A BUBBLING FLUIDISED BED REACTOR
Chryss, A. DNS OF TURBULENT NON-NEWTONIAN FLOW IN AN OPEN CHANNEL
Chu, K.W. MODELLING THE MULTIPHASE FLOW IN DENSE MEDIUM CYCLONES
Cleary, P.W. SIMULATIONS OF HUMAN SWIMMING USING SMOOTHED PARTICLE HYDRODYNAMICS USING DISTRIBUTED CONTACTS IN DEM TO MODEL GRANULAR SHEAR FLOWS INVESTIGATION OF FLOW DYNAMICS AND PLASTIC DEFORMATION IN ARC WELDING USING SPH VALIDATION OF DEM PREDICTIONS OF GRANULAR FLOW AND SEPARATION EFFICIENCY FOR A HORIZONTAL LABORATORY SCALE WIRE MESH SCREEN EFFECT OF SCREW DESIGN AND PARTICLE SHAPE ON HOPPER DRAW DOWN BY A HORIZONTAL SCREW FEEDER THE ROLE OF PARTICLE SHAPE IN PNEUMATIC CONVEYING THE EFFECT OF GAS DYNAMICS ON HOPPER DISCHARGE RATES SCREW CONVEYOR PERFORMANCE: COMPARISON OF DISCRETE ELEMENT MODELLLING WITH LABORATORY EXPERIMENTS STREAK PATTERNS IN BINARY GRANULAR MEDIA IN A ROTARY CLASSIFIER SPH MODELLING OF FLUID FLOW AT THE GRAIN LEVEL IN A POROUS MEDIUM VALIDATION OF SPH PREDICTIONS OF OXIDE GENERATED DURING Al MELT TRANSFER VISCOUS LIQUID AIR-MIXING: INFLUENCE OF LIQUID DENSITY RATIO USING SMOOTHED PARTICLE HYDRODYNAMICS TO STUDY WAVE IMPACT ON FLOATING OFFSHORE PLATFORMS: THE EFFECT OF MOORING SYSTEM MODELLING SLOSHING IN LNG TANKS EFFECT OF ROTOR BLADE ANGLE AND CLEARANCE ON BLOOD FLOW THROUGH A NON-PULSATILE, AXIAL, HEART PUMP SLURRY FLOW IN A TOWER MILL
Cloete, S. COUPLED DPM AND VOF MODEL FOR ANALYSES OF GAS STIRRED LADLES AT HIGHER GAS RATES
Coertzen, M. COMPARISON OF UCG CAVITY GROWTH WITH CFD MODEL PREDICTIONS
Cogan, S.J. THE EFFECTS OF VORTEX BREAKDOWN BUBBLES ON THE MIXING ENVIRONMENT INSIDE A BASE DRIVEN BIOREACTOR
Cohen, R. SIMULATIONS OF HUMAN SWIMMING USING SMOOTHED PARTICLE HYDRODYNAMICS
Collecutt, G. CFD SIMULATION OF UNDERGROUND COAL DUST EXPLOSIONS AND ACTIVE EXPLOSION BARRIERS
Cummins, S. USING DISTRIBUTED CONTACTS IN DEM TO MODEL GRANULAR SHEAR FLOWS
Cooksey, M.A. DEVELOPMENT OF BUBBLE DRIVEN FLOW CFD MODEL APPLIED FOR ALUMINIUM SMELTING CELLS
Back to Top
Das, R. INVESTIGATION OF FLOW DYNAMICS AND PLASTIC DEFORMATION IN ARC WELDING USING SPH
Davidson, M.R. ELECTRO-OSMOTIC EFFECTS IN LOW REYNOLDS NUMBER FLOW THROUGH A PLANAR MICROFLUIDIC CONTRACTION-EXPANSION SIMULATING AGGLOMERATION OF MOLTEN PARTICLES IN THE FLASH SMELTING REACTION SHAFT
Deen, N.G. DEM AND TFM SIMULATIONS OF SOLIDS MIXING
Delaney, G.W. VALIDATION OF DEM PREDICTIONS OF GRANULAR FLOW AND SEPARATION EFFICIENCY FOR A HORIZONTAL LABORATORY SCALE WIRE MESH SCREEN
Delfel, S. COMPUTATIONAL FLUID DYNAMICS IN THE PULP AND PAPER INDUSTRY - THE DESIGN OF A HIGH PERFORMANCE PULP SCREEN ROTOR
Derksen, J. SIMULATIONS OF THIXOTROPIC LIQUIDS
Dhaene, T. SURROGATE BASED SENSITIVITY ANALYSIS OF PROCESS EQUIPMENT
Dhondi, S. COMPLEX FLUID MIXING IN MICRO-FLUIDIC DEVICES: THEORY AND SIMULATIONS
Dhopade, P. SHEAR LAYER REATTACHMENT ON A SQUARE CYLINDER WITH INCIDENCE ANGLE VARIATION
Dickenson, P. THE FEASIBILITY OF SMOOTHED PARTICLE HYDRODYNAMICS FOR MULTIPHASE OILFIELD SYSTEMS
Didwania, A.K. CFD SIMULATION SCALE-UP OF A DUAL-FLUIDIZED BED GASIFIER FOR BIOMASS
Dong, K.J. SIMULATION OF LIQUID-SOLID FLOW IN A COAL DISTRIBUTOR: INHOMOGENEOUS MODEL VS HOMOGENEOUS MODEL
Doolan, C.J. GRID CONVERGENCE STUDY FOR A TWO-DIMENSIONAL SIMULATION OF FLOW AROUND A SQUARE CYLINDER AT A LOW REYNOLDS NUMBER
Dragomir, S. PREDICTING ENERGY DISSIPATION CHARACTERISTICS OF A TUMBLING GRANULAR-FLOW DAMPER USING DEM
Duan, X. AN OVERALL ASSESSMENT OF ABND MODEL FOR LARGE-SCALE BUBBLY FLOWS
Dumble, S. COMPARISON OF UCG CAVITY GROWTH WITH CFD MODEL PREDICTIONS
Back to Top
Ejlali, A. NUMERICAL ANALYSIS OF FLUID FLOW AND HEAT TRANSFER THROUGH REACTIVE COAL STOCKPILE
Ellis, C.L. TWO-DIMENSIONAL COMPUTATIONAL ANALYSIS OF "HIGH TAIL" CONFIGURATION AIRCRAFT WAKE VORTEX PAIRS
Back to Top
Fahmy, M. RESTRICTED REGIONS OF RAYLEIGH-BÉNARD-MARANGONI CONVECTION IN SOLUTE TRANSFER BETWEEN GAS-LIQUID PHASES
Farooque, T. BIOREACTOR DEVELOPMENT FOR CARTILAGE TISSUE ENGINEERING: COMPUTATIONAL MODELLING AND EXPERIMENTAL RESULTS
Feilmayr, C.. SIMULATION OF OFFGAS SCRUBBING BY A COMBINED EULERIAN-LANGRANGIAN MODEL
Feng, Y.Q. DEVELOPMENT OF BUBBLE DRIVEN FLOW CFD MODEL APPLIED FOR ALUMINIUM SMELTING CELLS CFD-DEM MODELLING OF GAS FLUIDIZATION OF PARTICLE MIXTURES WITH SIZE AND DENSITY DIFFERENCES
Fernandez, J.W. EFFECT OF SCREW DESIGN AND PARTICLE SHAPE ON HOPPER DRAW DOWN BY A HORIZONTAL SCREW FEEDER
Fletcher, D.F COMPUTATIONAL FLUID DYNAMICS MODELLING OF POROUS BURNERS
Founti, M.A. CO DISPERSION IN A CAR-REPAIR SHOP: AN EXPERIMENTAL AND CFD MODELLING STUDY DROPLET EVAPORATION ASSISTED BY "STABILIZED COOL FLAMES": SCRUTINIZING ALTERNATIVE CFD MODELLING APPROACHES A 3D CFD MODELLING STUDY OF A DIESEL OIL EVAPORATION DEVICE OPERATING IN THE "STABILIZED COOL FLAME" REGIME
Fox, R.O. VALIDATION OF LES PREDICTIONS FOR TURBULENT FLOWS IN A CONFINED IMPINGING JET REACTOR MULTIPHASE CFD FOR GAS-PARTICLE FLOWS: BEYOND THE TWO-FLUID MODEL CFD MODELLING OF ELECTROSTATIC FORCES IN GAS-SOLID FLUIDIZED BEDS AND THE ROLE OF PROCESS UPSETS
Frank, T. RECENT ADVANCES IN ANSYS CFD MULTIPHASE FLOW MODEL DEVELOPMENT, VALIDATION AND APPLICATION
Fung, M.C. EXTERNAL CHARACTERISTICS OF SPRAY ATOMISATION FROM A NASAL SPRAY DEVICE
Back to Top
Gararia, S.N. PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS
Gavi, E. VALIDATION OF LES PREDICTIONS FOR TURBULENT FLOWS IN A CONFINED IMPINGING JET REACTOR
Ge, W. A CONCEPTUAL MODEL FOR GAS-LIQUID INTERACTION AND ITS INTEGRATION INTO CFD SIMULATION OF BUBBLE COLUMNS
van Gerner, J.H. DEVELOPMENT OF A NOVEL HYBRID DISCRETE PARTICLE - IMMERSED BOUNDARY MODEL FOR FLUIDIZED BED MEMBRANE REACTORS
Giacobello, M. NUMERICAL STUDIES OF HIGH REYNOLDS NUMBER FLOW PAST A STATIONARY AND ROTATING SPHERE
Godlieb, W. DEM AND TFM SIMULATIONS OF SOLIDS MIXING
Goniva, C. SIMULATION OF OFFGAS SCRUBBING BY A COMBINED EULERIAN-LANGRANGIAN MODEL COMPREHENSIVE DEM-DPM-CFD SIMULATIONS - MODEL SYNTHESIS, EXPERIMENTAL VALIDATION AND SCALABILITY
Gooding, R.W. COMPUTATIONAL FLUID DYNAMICS IN THE PULP AND PAPER INDUSTRY - THE DESIGN OF A HIGH PERFORMANCE PULP SCREEN ROTOR
Gorissen, D. SURROGATE BASED SENSITIVITY ANALYSIS OF PROCESS EQUIPMENT
Gorter, S. DEM AND TFM SIMULATIONS OF SOLIDS MIXING
Gradinscak, M. A FINITE ELEMENT BASED PREDICTION MODEL TO CONTROL LIQUID SLOSHING WITH CONTAINER FLEXIBILITY
Graham, L.J. W. SLURRY EROSION IN COMPLEX FLOWS: EXPERIMENT AND CFD
Granström, B.R. CFD MODELLING OF THE FLOW THROUGH A GRATE-KILN
Gray, N. SIMULATING AGGLOMERATION OF MOLTEN PARTICLES IN THE FLASH SMELTING REACTION SHAFT
Gray, S. CFD MODELLLING OF A NOVEL GRAVITY SEPARATION DEVICE
Grecov, D. RHEOLOGICAL AND FLOW MODELLING OF VISCOELASTIC FLUIDS BETWEEN ECCENTRIC CYLINDERS
Greenfield, M. COMPUTATIONAL FLUID DYNAMICS MODEL OF ELECTRIC FURNACE FOR SMELTING NICKEL CALCINE
Gruenewald, G. MODELLING THE FLUID DYNAMICS AND THE GROWTH KINETICS OF FLUIDIZED BED SPRAY GRANULATION
Guang, R.Y. DNS OF TURBULENT NON-NEWTONIAN FLOW IN AN OPEN CHANNEL
Gunjal, P. TAILORING OXYGEN DISTRIBUTION IN 300MM CZOCHRALSKI CRYSTAL OF PURE SILICON USING CUSP MAGNETIC FIELD
Guo, B.Y. SIMULATION OF LIQUID-SOLID FLOW IN A COAL DISTRIBUTOR: INHOMOGENEOUS MODEL VS HOMOGENEOUS MODEL NUMERICAL SIMULATION OF GAS FLOW IN AN ELECTROSTATIC PRECIPITATOR
Guo, L.J. NUMERICAL SIMULATION OF MAGNESIUM PRODUCTION BY THE PIDGEON PROCESS PART I: A NEW MODE FOR MAGNESIUM REDUCTION PROCESS IN A HORIZONTAL RETORT NUMERICAL SIMULATION OF MAGNESIUM PRODUCTION BY THE PIDGEON PROCESS PART II: COUPLING OF THE MAGNESIUM REDUCTION IN THE RETORTS WITH THE SURROUNDING THERMAL-FLOW FIELDS IN A COAL-FIRED FURNACE
Gupta, H.P. PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS NUMERICAL SIMULATION OF HEAT TRANSFER OF NANOFLUIDS IN AN ENCLOSURE
Back to Top
Haavisto, S. PARTICLE VELOCITY AND CONCENTRATION PROFILES OF SAND - WATER SLURRY IN STIRRED TANK - MEASUREMENTS AND MODELLING
Hackman, L. THE USE OF CFD AT SYNCRUDE: SUCCESSES AND CHALLENGES
Hain, K. SIMULATION OF THE FILLING OF POLYETHYLENE- TEREPHTHALATE- BOTTLES (PET) WITH A VOLUMETIC SWIRL CHAMBER VALVE (VODM 40355) ON THE BASIS OF CALCULATION MODELS AND EXPERIMENTS
Harris, A.T. COMPUTATIONAL FLUID DYNAMICS MODELLING OF POROUS BURNERS
Harvie, D.J.E.. ELECTRO-OSMOTIC EFFECTS IN LOW REYNOLDS NUMBER FLOW THROUGH A PLANAR MICROFLUIDIC CONTRACTION-EXPANSION
Hasan, N. COMPARISON OF A COMPUTATIONAL MODEL OF SINGLE BUBBLE COLLECTION EFFICIENCY IN A HALLIMOND TUBE
Haywood, R.J. ENHANCED PROBLEM SOLVING; THE INTEGRATION OF CFD AND OTHER ENGINEERING APPLICATIONS
Heidarpour, V. COMPUTER-AIDED ANALYSIS OF FLOW IN A ROTATING SINGLE DISK
Heiskanen, K. MAPPING OF COLLISION REGIMES IN FLOTATION MODELLING
Herwadkar, S.V. CFD MODELING OF A CEMENT KILN WITH MULTI CHANNEL BURNER FOR OPTIMIZATION OF FLAME PROFILE
Heschl, C. DEMANDS ON TURBULENCE MODELLLING FOR VENTILATED ROOM AIRFLOWS
Higgins, D. SIMULATING AGGLOMERATION OF MOLTEN PARTICLES IN THE FLASH SMELTING REACTION SHAFT
Hilden, M. VALIDATION OF DEM PREDICTIONS OF GRANULAR FLOW AND SEPARATION EFFICIENCY FOR A HORIZONTAL LABORATORY SCALE WIRE MESH SCREEN
Hillier, D.R. IMPLEMENTATION OF MOVING BOUNDARIES IN SPECTRAL-ELEMENT SOFTWARE
Hilton, J.E. THE ROLE OF PARTICLE SHAPE IN PNEUMATIC CONVEYING THE EFFECT OF GAS DYNAMICS ON HOPPER DISCHARGE RATES
Höhne, T. EXPERIMENTS AND NUMERICAL SIMULATIONS OF HORIZONTAL TWO PHASE FLOW REGIMES
Holtham, P.N. CFD MODELLING OF HYDROCYCLONES: VALIDATION AGAINST PLANT HYDRODYNAMIC PERFORMANCE
Hormozi, F. PREDICTION OF WAX DEPOSITION IN PIPELINE BY CFD TECHNIQUES
Horrocks, J. INVESTIGATION OF ELECTROSTATIC PRECIPITATOR CHAR COLLECTOR DESIGNS USING COMPUTATIONAL FLUID DYNAMICS
Hou, Q.F. COMPUTATIONAL STUDY OF HEAT TRANSFER IN BUBBLING FLUIDIZED BEDS WITH GELDART A POWDER NUMERICAL SIMULATION OF GAS FLOW IN AN ELECTROSTATIC PRECIPITATOR
Hosseini, S.H. CFD SIMULATION OF GAS-SOLID FLOW IN A SPOUTED BED WITH A NON-POROUS DRAFT TUBE
Huang, C.J. NUMERICAL STUDY ON THE EFFUSION COOLING PERFORMANCE OVER THE WALLS OF AN ANNULAR BURNER
Hughes, T. CFD MODELLLING OF A NOVEL GRAVITY SEPARATION DEVICE
Humphreys, D. CFD SIMULATION OF UNDERGROUND COAL DUST EXPLOSIONS AND ACTIVE EXPLOSION BARRIERS
Hung, C.C. LOW REYNOLDS NUMBER UNSTEADY AERODYNAMIC CHARACTERISTICS OF FLAPPING CORRUGATED AIRFOIL
Hussam, W.K. A QUASI-TWO-DIMENSIONAL INVESTIGATION OF UNSTEADY TRANSITION IN SHALLOW FLOW PAST A CIRCULAR CYLINDER IN A CHANNEL
Hsu, U.K. LOW REYNOLDS NUMBER UNSTEADY AERODYNAMIC CHARACTERISTICS OF FLAPPING CORRUGATED AIRFOIL
Back to Top
Iaccarino, G. NUMERICAL STUDIES OF HIGH REYNOLDS NUMBER FLOW PAST A STATIONARY AND ROTATING SPHERE
Icardi, M. VALIDATION OF LES PREDICTIONS FOR TURBULENT FLOWS IN A CONFINED IMPINGING JET REACTOR
Inthavong, K. MODELLING SUBMICRON AND MICRON PARTICLE DEPOSITION IN A HUMAN NASAL CAVITY EXTERNAL CHARACTERISTICS OF SPRAY ATOMISATION FROM A NASAL SPRAY DEVICE UNSTEADY PARTICLE DEPOSITION IN A HUMAN NASAL CAVITY
Issa, R. SIMULATION OF INTERMITTENT FLOW IN MULTIPHASE OIL AND GAS PIPELINES
Itatani, K. HEMODYNAMIC SIMULATION FOR CONGENITAL HEART DISEASE
Back to Top
Jafar, F.A. FLOW MODE CHARACTERISATION OF LIQUID FILMS FALLING ON HORIZONTAL PLAIN CYLINDERS
Jahedi, M. NUMERICAL INVESTIGATION OF THE COLD SPRAY PROCESS
Jasak, H. OpenFOAM: OPEN SOURCE IN COMMERCIAL AND ACADEMIC CFD USE
Jermy, M. CFD MODELLING OF PULVERIZED COAL COMBUSTION IN A ROTARY LIME KILN
Johansen, S.T.. DEVELOPMENT OF A BOUNDARY CONDITION WALL FUNCTION FOR PARTICULATE FOULING CFD MODELING MODELLING THE TAPPING OF SILICON MELT FROM THE SUBMERGED ARC FURNACES
Johnsen, S.G. DEVELOPMENT OF A BOUNDARY CONDITION WALL FUNCTION FOR PARTICULATE FOULING CFD MODELING
de Jong, J.F. DEVELOPMENT OF A NOVEL HYBRID DISCRETE PARTICLE - IMMERSED BOUNDARY MODEL FOR FLUIDIZED BED MEMBRANE REACTORS
Jorgensen, F.R.A. THE EFFECT OF PARTICLE SIZE AND COMPOSITION ON THE PERFORMANCE OF THE COMPOSITE PARTICLE MODEL IN PREDICTING COMBUSTION BEHAVIOUR IN A FLASH FURNACE REACTION SHAFT
Joshi, J.B. CFD SIMULATION OF FLUID-PARTICLE AND PARTICLE-PARTICLE INTERACTION IN PACKED AND FLUIDISED BEDS
Back to Top
Kadkhodabeigi, M. MODELLING THE TAPPING OF SILICON MELT FROM THE SUBMERGED ARC FURNACES
Kandakure, M. CFD STUDY OF SLURRY HOMOGENIZER
Kaple, K. PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS
Karim, G. THE 3-D SIMULATION WITH DETAILED CHEMICAL KINETICS OF THE TURBULENT COMBUSTION IN A PRE-CHAMBER INDIRECT INJECTION DIESEL ENGINE
Karimipour, S. APPLICATION OF THE PARTICLE IN CELL APPROACH FOR THE SIMULATION OF BUBBLING FLUIDIZED BEDS OF GELDART A PARTICLES
Katsourinis, D.I. DROPLET EVAPORATION ASSISTED BY "STABILIZED COOL FLAMES": SCRUTINIZING ALTERNATIVE CFD MODELLING APPROACHES
Kaushik, A. CFD MODELING OF A CEMENT KILN WITH MULTI CHANNEL BURNER FOR OPTIMIZATION OF FLAME PROFILE
Kim, S.J. NUMERICAL SIMULATION FOR FAST PYROLYSIS OF WOODY BIOMASS IN A BUBBLING FLUIDISED BED REACTOR
Kind, M. MODELLING THE FLUID DYNAMICS AND THE GROWTH KINETICS OF FLUIDIZED BED SPRAY GRANULATION
Kishore, N. 2-D NEWTONIAN FLOW PAST ELLIPSOIDAL PARTICLES AT MODERATE REYNOLDS NUMBERS
Khaleghi, H. NUMERICAL MODELING OF IN-CYLINDER FLUID FLOW IN INTERNAL COMBUSTION ENGINES USING REYNOLDS STRESS TURBULENCE MODEL
King, D. COMBINED EXPERIMENTAL AND SIMULATION (CFD) ANALYSIS ON PERFORMANCE OF A HORIZONTAL TUBE REACTOR USED TO PRODUCE CARBON NANOTUBES
King, M.P. THE INFLUENCE OF HEIGHT RATIO ON RAYLEIGH-NUMBER SCALING AND STABILITY OF HORIZONTAL CONVECTION
Kloss, C. COMPREHENSIVE DEM-DPM-CFD SIMULATIONS - MODEL SYNTHESIS, EXPERIMENTAL VALIDATION AND SCALABILITY
Knoerzer, K. A CFD MODEL FOR SIMULATING HIGH PRESSURE THERMAL (HPT) PROCESSING - IMPACT OF MATERIAL PROPERTIES AND PROCESSING CONDITIONS ON PREDICTION ACCURACY NUMERICAL SIMULATION OF PULSED ELECTRIC FIELDS (PEF) PROCESSING FOR CHAMBER DESIGN AND OPTIMISATION CFD MODELLING OF THE ACOUSTIC STREAMING INDUCED BY AN ULTRASONIC HORN REACTOR
Koh, P.T.L. CFD MODELS OF MICROCEL AND JAMESON FLOTATION CELLS
Kolaitis, D.I. DROPLET EVAPORATION ASSISTED BY "STABILIZED COOL FLAMES": SCRUTINIZING ALTERNATIVE CFD MODELLING APPROACHES A 3D CFD MODELLING STUDY OF A DIESEL OIL EVAPORATION DEVICE OPERATING IN THE "STABILIZED COOL FLAME" REGIME CO DISPERSION IN A CAR-REPAIR SHOP: AN EXPERIMENTAL AND CFD MODELLING STUDY
Koponen, A. PARTICLE VELOCITY AND CONCENTRATION PROFILES OF SAND - WATER SLURRY IN STIRRED TANK - MEASUREMENTS AND MODELLING
Korman, B. VISCOUS LIQUID AIR-MIXING: INFLUENCE OF LIQUID DENSITY RATIO
Krepper, E. AN OVERALL ASSESSMENT OF ABND MODEL FOR LARGE-SCALE BUBBLY FLOWS
Kuan, B. CFD MODELLLING OF LIQUID JET BREAKUP IN CROSSFLOWS
Kuipers, J.A.M. DEVELOPMENT OF A NOVEL HYBRID DISCRETE PARTICLE - IMMERSED BOUNDARY MODEL FOR FLUIDIZED BED MEMBRANE REACTORS DEM AND TFM SIMULATIONS OF SOLIDS MIXING DRAG FORCE ON BUBBLES IN BUBBLE SWARMS
Kumar, N.N. 2-D NEWTONIAN FLOW PAST ELLIPSOIDAL PARTICLES AT MODERATE REYNOLDS NUMBERS
Kumaresan, T. PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS
Back to Top
Lakehal, D. VALIDATION OF LES PREDICTIONS FOR TURBULENT FLOWS IN A CONFINED IMPINGING JET REACTOR INTERFACE-TURBULENCE INTERACTIONS AND BUBBLE DYNAMICS
Lane, G. CFD SIMULATION OF A SOLVENT EXTRACTION PUMP MIXER UNIT: EVALUATING LARGE EDDY SIMULATION AND RANS BASED MODELS
Langberg, D. PHYSICAL AND MATHEMATICAL MODELLING INVESTIGATIONS OF THE MECHANISMS OF SPLASH GENERATION IN BATH SMELTING FURNACES
Larsson, I.A.S. KILN AERODYNAMICS VISUALISATION OF MERGING FLOW BY USAGE OF PIV AND CFD
Lester, D. SLURRY EROSION IN COMPLEX FLOWS: EXPERIMENT AND CFD
Li, C. INFLUENCE OF DRAG FORCES OF A SWARM OF BUBBLES IN ISOTHERMAL BUBBLY FLOW CONDITIONS
Li, J. CHOOSING THE MESH-INDEPENDENT SUB-GRID DRAG COEFFICIENT MODEL A CONCEPTUAL MODEL FOR GAS-LIQUID INTERACTION AND ITS INTEGRATION INTO CFD SIMULATION OF BUBBLE COLUMNS
Li, L.F. NUMERICAL SIMULATION OF GAS FLOW IN AN ELECTROSTATIC PRECIPITATOR
Li, R.B. NUMERICAL SIMULATION OF MAGNESIUM PRODUCTION BY THE PIDGEON PROCESS PART I: A NEW MODE FOR MAGNESIUM REDUCTION PROCESS IN A HORIZONTAL RETORT NUMERICAL SIMULATION OF MAGNESIUM PRODUCTION BY THE PIDGEON PROCESS PART II: COUPLING OF THE MAGNESIUM REDUCTION IN THE RETORTS WITH THE SURROUNDING THERMAL-FLOW FIELDS IN A COAL-FIRED FURNACE
Li, S. NUMERICAL INVESTIGATION OF THE COLD SPRAY PROCESS
Li, Z. MODELLING THE FLUID DYNAMICS AND THE GROWTH KINETICS OF FLUIDIZED BED SPRAY GRANULATION
Liffman, K. MULTISCALE MODELLING OF CEREBRAL BLOOD FLOW STREAK PATTERNS IN BINARY GRANULAR MEDIA IN A ROTARY CLASSIFIER
Lindmark, E.M. KILN AERODYNAMICS VISUALISATION OF MERGING FLOW BY USAGE OF PIV AND CFD
Lindmeier, I. DEMANDS ON TURBULENCE MODELLLING FOR VENTILATED ROOM AIRFLOWS
Liovic, P. INTERFACE-TURBULENCE INTERACTIONS AND BUBBLE DYNAMICS
Liu, C. THE 3-D SIMULATION WITH DETAILED CHEMICAL KINETICS OF THE TURBULENT COMBUSTION IN A PRE-CHAMBER INDIRECT INJECTION DIESEL ENGINE
Liu, J.L. HEMODYNAMIC SIMULATION FOR CONGENITAL HEART DISEASE
Liu, K. RHEOLOGICAL AND FLOW MODELLING OF VISCOELASTIC FLUIDS BETWEEN ECCENTRIC CYLINDERS
Lo, S. PREDICTING PRESSURE DROP IN PNEUMATIC CONVEYING USING THE DISCRETE ELEMENT MODELING APPROACH
Lowke, J.J. CFD MODELLING OF ARC WELDING - THE IMPORTANCE OF THE ARC PLASMA
Lu, B. CHOOSING THE MESH-INDEPENDENT SUB-GRID DRAG COEFFICIENT MODEL TWO-PHASE FLOW ANALYSIS AND EXPERIMENTAL INVESTIGATION OF MICRO-PIV FOR EMITTER MICRO-CHANNELS
Lucas, D. AN OVERALL ASSESSMENT OF ABND MODEL FOR LARGE-SCALE BUBBLY FLOWS
Lundström, T.S. CFD-MODELLING OF SELECTIVE NON-CATALYTIC REDUCTION OF NOx IN GRATE-KILN PLANTS CFD MODELLING OF THE FLOW THROUGH A GRATE-KILN KILN AERODYNAMICS VISUALISATION OF MERGING FLOW BY USAGE OF PIV AND CFD
Luo, Y. COMPARISON OF UCG CAVITY GROWTH WITH CFD MODEL PREDICTIONS
Back to Top
Macphee, J.E. CFD MODELLING OF PULVERIZED COAL COMBUSTION IN A ROTARY LIME KILN
McBride, B. EFFECT OF SCREW DESIGN AND PARTICLE SHAPE ON HOPPER DRAW DOWN BY A HORIZONTAL SCREW FEEDER
Mahdi, K.A. CFD SIMULATION OF A CONICAL-CYLINDRICAL CRYSTALLIZATION UNIT USING MULTI-PHASE EULERIAN MODEL
Majeski, A. COMPUTATIONAL FLUID DYNAMICS MODEL OF ELECTRIC FURNACE FOR SMELTING NICKEL CALCINE
Manasseh, R. MULTISCALE MODELLING OF CEREBRAL BLOOD FLOW
Manninen, M. PARTICLE VELOCITY AND CONCENTRATION PROFILES OF SAND - WATER SLURRY IN STIRRED TANK - MEASUREMENTS AND MODELLING
Marchisio, D.L. VALIDATION OF LES PREDICTIONS FOR TURBULENT FLOWS IN A CONFINED IMPINGING JET REACTOR
Marjavaara, B.D. CFD-MODELLING OF SELECTIVE NON-CATALYTIC REDUCTION OF NOx IN GRATE-KILN PLANTS CFD MODELLING OF THE FLOW THROUGH A GRATE-KILN KILN AERODYNAMICS VISUALISATION OF MERGING FLOW BY USAGE OF PIV AND CFD
Marsh, A.P. PREDICTING THE DYNAMIC STRUCTURAL RESPONSE CONTROLLED BY A SLOSHING ABSORBER USING SPH
Marsh, C. CFD MODELLING OF ALUMINA CALCINER FURNACES
Mason, B. SIMULATIONS OF HUMAN SWIMMING USING SMOOTHED PARTICLE HYDRODYNAMICS
Mason, L.R. THE EFFECT OF GAS DYNAMICS ON HOPPER DISCHARGE RATES
Miao, J.M. LOW REYNOLDS NUMBER UNSTEADY AERODYNAMIC CHARACTERISTICS OF FLAPPING CORRUGATED AIRFOIL NUMERICAL STUDY ON THE EFFUSION COOLING PERFORMANCE OVER THE WALLS OF AN ANNULAR BURNER
Mirzaee, I. COMPUTER-AIDED ANALYSIS OF FLOW IN A ROTATING SINGLE DISK
Mishra, K.B. PREDICTION OF BURNING RATE OF AN ACCIDENTALLY RELEASED FLAMMABLE FUEL BY MEANS OF CFD SIMULATION
Miyaji, K. HEMODYNAMIC SIMULATION FOR CONGENITAL HEART DISEASE
Mohanarangam, K. EFFECT OF PARTICLES IN A TURBULENT GAS-PARTICLE FLOW WITHIN A 90° BEND CFD MODELLING OF FLOATING AND SETTLING PHASES IN SETTLING TANKS EVALUATION OF TWO-EQUATION TURBULENCE MODELS IN A LABORATORY-SCALE THICKENER FEEDWELL TURBULENCE MODEL ANALYSIS OF FLOW INSIDE A HYDROCYCLONE
Molteno, T. RESTRICTED REGIONS OF RAYLEIGH-BÉNARD-MARANGONI CONVECTION IN SOLUTE TRANSFER BETWEEN GAS-LIQUID PHASES
Morrison, R.D. VALIDATION OF DEM PREDICTIONS OF GRANULAR FLOW AND SEPARATION EFFICIENCY FOR A HORIZONTAL LABORATORY SCALE WIRE MESH SCREEN SLURRY FLOW IN A TOWER MILL
Mossad, R. INERTISATION OF HIGHWALL MINING TO CONTROL METHANE CONCENTRATIONS AT THE MOURA MINE NUMERICAL PREDICTION OF AIR FLOW IN SHARP 90° ELBOW
Muddle, B. NUMERICAL INVESTIGATION OF THE COLD SPRAY PROCESS
Muhle, M.E. CFD MODELLING OF ELECTROSTATIC FORCES IN GAS-SOLID FLUIDIZED BEDS AND THE ROLE OF PROCESS UPSETS
Muhr, M. SIMULATION OF THE FILLING OF POLYETHYLENE- TEREPHTHALATE- BOTTLES (PET) WITH A VOLUMETIC SWIRL CHAMBER VALVE (VODM 40355) ON THE BASIS OF CALCULATION MODELS AND EXPERIMENTS
Murphy, A.B. CFD MODELLING OF ARC WELDING - THE IMPORTANCE OF THE ARC PLASMA
Back to Top
Nabifar, M.R. NUMERICAL MODELING OF IN-CYLINDER FLUID FLOW IN INTERNAL COMBUSTION ENGINES USING REYNOLDS STRESS TURBULENCE MODEL
Nagaraj, H. CFD STUDY OF SLURRY HOMOGENIZER
Narasimha, M. CFD MODELLING OF HYDROCYCLONES: VALIDATION AGAINST PLANT HYDRODYNAMIC PERFORMANCE
Naser, J. INDUSTRIAL APPLICATION OF CFD – A REVIEW OF FEW EXAMPLES CFD SIMULATION OF SUPERSONIC OXYGEN JET BEHAVIOUR INSIDE A HIGH TEMPERATURE FIELD
Nebauer, J.R.A. STABILITY OF OSCILLATORY AND PULSATILE PIPE FLOW
Nguyen, T.V. EVALUATION OF TWO-EQUATION TURBULENCE MODELS IN A LABORATORY-SCALE THICKENER FEEDWELL
Back to Top
Ollivier-Gooch, C. COMPUTATIONAL FLUID DYNAMICS IN THE PULP AND PAPER INDUSTRY - THE DESIGN OF A HIGH PERFORMANCE PULP SCREEN ROTOR
Olsen, J.E. COUPLED DPM AND VOF MODEL FOR ANALYSES OF GAS STIRRED LADLES AT HIGHER GAS RATES
Olsen, M.G. VALIDATION OF LES PREDICTIONS FOR TURBULENT FLOWS IN A CONFINED IMPINGING JET REACTOR
Olson, J.A. COMPUTATIONAL FLUID DYNAMICS IN THE PULP AND PAPER INDUSTRY - THE DESIGN OF A HIGH PERFORMANCE PULP SCREEN ROTOR
Ooi, A. NUMERICAL STUDIES OF HIGH REYNOLDS NUMBER FLOW PAST A STATIONARY AND ROTATING SPHERE NUMERICAL SIMULATIONS OF BUBBLE DISPERSION OVER A HYDROFOIL
Owen, P.J. SCREW CONVEYOR PERFORMANCE: COMPARISON OF DISCRETE ELEMENT MODELLLING WITH LABORATORY EXPERIMENTS
Back to Top
Pan, Y. CFD SIMULATION OF FREE SURFACE FLOW AND HEAT TRANSFER OF LIQUID SLAG ON A SPINNING DISC FOR A NOVEL DRY SLAG GRANULATION PROCESS PHYSICAL AND MATHEMATICAL MODELLING INVESTIGATIONS OF THE MECHANISMS OF SPLASH GENERATION IN BATH SMELTING FURNACES
Pareek, V.K. CHARACTERIZING LIQUID FILM THICKNESS IN SPINNING DISC REACTORS
Paschedag, A. 2D SIMULATIONS OF INTERFACIAL INSTABILITIES AT DEFORMABLE SINGLE DROPLETS
Passalacqua, A. MULTIPHASE CFD FOR GAS-PARTICLE FLOWS: BEYOND THE TWO-FLUID MODEL
Pereira, G.G. STREAK PATTERNS IN BINARY GRANULAR MEDIA IN A ROTARY CLASSIFIER SPH MODELLING OF FLUID FLOW AT THE GRAIN LEVEL IN A POROUS MEDIUM COMPLEX FLUID MIXING IN MICRO-FLUIDIC DEVICES: THEORY AND SIMULATIONS VALIDATION OF SPH PREDICTIONS OF OXIDE GENERATED DURING Al MELT TRANSFER
Pinson, D. CFD-DEM SIMULATION OF GAS FLUIDIZATION OF ELLIPSOIDAL PARTICLES
Pirker, S. SIMULATION OF OFFGAS SCRUBBING BY A COMBINED EULERIAN-LANGRANGIAN MODEL COMPREHENSIVE DEM-DPM-CFD SIMULATIONS - MODEL SYNTHESIS, EXPERIMENTAL VALIDATION AND SCALABILITY
Pliakas, T. ENHANCED PROBLEM SOLVING; THE INTEGRATION OF CFD AND OTHER ENGINEERING APPLICATIONS
Poon, K.W. NUMERICAL STUDIES OF HIGH REYNOLDS NUMBER FLOW PAST A STATIONARY AND ROTATING SPHERE
Prakash, M. VALIDATION OF SPH PREDICTIONS OF OXIDE GENERATED DURING Al MELT TRANSFER VISCOUS LIQUID AIR-MIXING: INFLUENCE OF LIQUID DENSITY RATIO PREDICTING THE DYNAMIC STRUCTURAL RESPONSE CONTROLLED BY A SLOSHING ABSORBER USING SPH SPH MODELLING OF FLUID FLOW AT THE GRAIN LEVEL IN A POROUS MEDIUM
Proud, D. CFD SIMULATION OF UNDERGROUND COAL DUST EXPLOSIONS AND ACTIVE EXPLOSION BARRIERS
Pucilowski, S. STREAK PATTERNS IN BINARY GRANULAR MEDIA IN A ROTARY CLASSIFIER
Pugsley, T. APPLICATION OF THE PARTICLE IN CELL APPROACH FOR THE SIMULATION OF BUBBLING FLUIDIZED BEDS OF GELDART A PARTICLES
Back to Top
Qian, Y. HEMODYNAMIC SIMULATION FOR CONGENITAL HEART DISEASE
Back to Top
Ramchandran, P. TAILORING OXYGEN DISTRIBUTION IN 300MM CZOCHRALSKI CRYSTAL OF PURE SILICON USING CUSP MAGNETIC FIELD
Reddy, G.R.K. CFD SIMULATION OF FLUID-PARTICLE AND PARTICLE-PARTICLE INTERACTION IN PACKED AND FLUIDISED BEDS
Restrepo, J.M. COMPUTATIONAL SIMULATION OF RED BLOOD CELL MOTION IN MICROVESSEL BIFURCATIONS
Roghair, I. DRAG FORCE ON BUBBLES IN BUBBLE SWARMS
Rohan, P. VALIDATION OF SPH PREDICTIONS OF OXIDE GENERATED DURING Al MELT TRANSFER
Rokkam, R.G. CFD MODELLING OF ELECTROSTATIC FORCES IN GAS-SOLID FLUIDIZED BEDS AND THE ROLE OF PROCESS UPSETS
Roy, N.N. PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS
Rudman, M. USING SMOOTHED PARTICLE HYDRODYNAMICS TO STUDY WAVE IMPACT ON FLOATING OFFSHORE PLATFORMS: THE EFFECT OF MOORING SYSTEM MODELLING SLOSHING IN LNG TANKS DNS OF TURBULENT NON-NEWTONIAN FLOW IN AN OPEN CHANNEL
Runstedtler, A. COMPUTATIONAL FLUID DYNAMICS MODEL OF ELECTRIC FURNACE FOR SMELTING NICKEL CALCINE
Russell, R. THE EFFECT OF PARTICLE SIZE AND COMPOSITION ON THE PERFORMANCE OF THE COMPOSITE PARTICLE MODEL IN PREDICTING COMBUSTION BEHAVIOUR IN A FLASH FURNACE REACTION SHAFT
Ryan, K. SHORT-WAVE INSTABILITY GROWTH IN CLOSELY SPACED VORTEX PAIRS MODELLING VARIATIONS IN SHEAR-RATE AROUND A GEOMETRICALLY SIMILAR THROMBUS IN-VITRO THE EFFECTS OF VORTEX BREAKDOWN BUBBLES ON THE MIXING ENVIRONMENT INSIDE A BASE DRIVEN BIOREACTOR TWO-DIMENSIONAL COMPUTATIONAL ANALYSIS OF "HIGH TAIL" CONFIGURATION AIRCRAFT WAKE VORTEX PAIRS IMPLEMENTATION OF MOVING BOUNDARIES IN SPECTRAL-ELEMENT SOFTWARE SHORT-WAVE INSTABILITIES ON A VORTEX PAIR OF UNEQUAL STRENGTH CIRCULATION RATIO
Back to Top
Salim, S.M. WALL Y+ APPROACH FOR DEALING WITH TURBULENT FLOW OVER A SURFACE MOUNTED CUBE: PART 1 - LOW REYNOLDS NUMBER WALL Y+ APPROACH FOR DEALING WITH TURBULENT FLOW OVER A SURFACE MOUNTED CUBE: PART 2 - HIGH REYNOLDS NUMBER
Sanz, W. DEMANDS ON TURBULENCE MODELLLING FOR VENTILATED ROOM AIRFLOWS
Sapra, V. PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS
Sarkar, S. CFD MODELING OF A CEMENT KILN WITH MULTI CHANNEL BURNER FOR OPTIMIZATION OF FLAME PROFILE
Schönbucher, A. PREDICTION OF BURNING RATE OF AN ACCIDENTALLY RELEASED FLAMMABLE FUEL BY MEANS OF CFD SIMULATION
Schroeder, S. NUMERICAL SIMULATION OF PULSED ELECTRIC FIELDS (PEF) PROCESSING FOR CHAMBER DESIGN AND OPTIMISATION
Schwarz, M.P. DEVELOPMENT OF BUBBLE DRIVEN FLOW CFD MODEL APPLIED FOR ALUMINIUM SMELTING CELLS CFD MODELS OF MICROCEL AND JAMESON FLOTATION CELLS NUMERICAL PREDICTION OF AIR FLOW IN SHARP 90° ELBOW CFD MODELLLING OF A NOVEL GRAVITY SEPARATION DEVICE CFD SIMULATION OF A SOLVENT EXTRACTION PUMP MIXER UNIT: EVALUATING LARGE EDDY SIMULATION AND RANS BASED MODELS NUMERICAL MODELLING OF BROWN COAL COMBUSTION IN A TANGENTIALLY-FIRED FURNACE
Se, C.M.K. UNSTEADY PARTICLE DEPOSITION IN A HUMAN NASAL CAVITY
Secomb, T.W. COMPUTATIONAL SIMULATION OF RED BLOOD CELL MOTION IN MICROVESSEL BIFURCATIONS
Sellier, M. CFD MODELLING OF PULVERIZED COAL COMBUSTION IN A ROTARY LIME KILN
Semercigil, S.E. CFD DESIGN OF A GENERIC CONTROLLER FOR VORTEX-INDUCED RESONANCE PREDICTING ENERGY DISSIPATION CHARACTERISTICS OF A TUMBLING GRANULAR-FLOW DAMPER USING DEM A FINITE ELEMENT BASED PREDICTION MODEL TO CONTROL LIQUID SLOSHING WITH CONTAINER FLEXIBILITY PREDICTING THE DYNAMIC STRUCTURAL RESPONSE CONTROLLED BY A SLOSHING ABSORBER USING SPH
Servant, G.. CFD MODELLING OF A SUBTERRANEAN BUSBAR FOR THERMAL PERFORMANCE
Seyedinezhad, H. PREDICTION OF WAX DEPOSITION IN PIPELINE BY CFD TECHNIQUES
Shah, R.P. PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS
Shahamiri, S.A. MODELING THE REACTIVE PROCESSES WITHIN A CATALYTIC POROUS MEDIUM
Shanbghazani, M. COMPUTER-AIDED ANALYSIS OF FLOW IN A ROTATING SINGLE DISK
Sharma, S. NUMERICAL SIMULATION OF HEAT TRANSFER OF NANOFLUIDS IN AN ENCLOSURE
Sheard, G.J. THE INFLUENCE OF HEIGHT RATIO ON RAYLEIGH-NUMBER SCALING AND STABILITY OF HORIZONTAL CONVECTION SHORT-WAVE INSTABILITY GROWTH IN CLOSELY SPACED VORTEX PAIRS MODELLING VARIATIONS IN SHEAR-RATE AROUND A GEOMETRICALLY SIMILAR THROMBUS IN-VITRO THE EFFECTS OF VORTEX BREAKDOWN BUBBLES ON THE MIXING ENVIRONMENT INSIDE A BASE DRIVEN BIOREACTOR SHEAR LAYER REATTACHMENT ON A SQUARE CYLINDER WITH INCIDENCE ANGLE VARIATION TWO-DIMENSIONAL COMPUTATIONAL ANALYSIS OF "HIGH TAIL" CONFIGURATION AIRCRAFT WAKE VORTEX PAIRS IMPLEMENTATION OF MOVING BOUNDARIES IN SPECTRAL-ELEMENT SOFTWARE A QUASI-TWO-DIMENSIONAL INVESTIGATION OF UNSTEADY TRANSITION IN SHALLOW FLOW PAST A CIRCULAR CYLINDER IN A CHANNEL SHORT-WAVE INSTABILITIES ON A VORTEX PAIR OF UNEQUAL STRENGTH CIRCULATION RATIO
Shen, Z.C. CFD SIMULATION OF GAS-LIQUID FLOW IN A LARGE SCALE FLOTATION CELL
Shimasaki, S. FORMATION OF UNIFORMLY-SIZED DROPLETS FROM CAPILLARY JET BY ELECTROMAGNETIC FORCE
Singh, V. PREDICTING PRESSURE DROP IN PNEUMATIC CONVEYING USING THE DISCRETE ELEMENT MODELING APPROACH
Sinnott, M.D. EFFECT OF ROTOR BLADE ANGLE AND CLEARANCE ON BLOOD FLOW THROUGH A NON-PULSATILE, AXIAL, HEART PUMP SLURRY FLOW IN A TOWER MILL PREDICTING ENERGY DISSIPATION CHARACTERISTICS OF A TUMBLING GRANULAR-FLOW DAMPER USING DEM
van Sint Annaland, M. DEVELOPMENT OF A NOVEL HYBRID DISCRETE PARTICLE - IMMERSED BOUNDARY MODEL FOR FLUIDIZED BED MEMBRANE REACTORS DRAG FORCE ON BUBBLES IN BUBBLE SWARMS
So, J. SHORT-WAVE INSTABILITIES ON A VORTEX PAIR OF UNEQUAL STRENGTH CIRCULATION RATIO
Solnordal, C.B. THE EFFECT OF PARTICLE SIZE AND COMPOSITION ON THE PERFORMANCE OF THE COMPOSITE PARTICLE MODEL IN PREDICTING COMBUSTION BEHAVIOUR IN A FLASH FURNACE REACTION SHAFT CFD MODELLLING OF A NOVEL GRAVITY SEPARATION DEVICE
Sonavane,Y. NUMERICAL ANALYSIS OF THE HEAT TRANSFER IN THE WALL OF ROTARY KILN USING FINITE ELEMENT METHOD ANSYS
Song, T. CFD SIMULATION OF GAS-LIQUID FLOW IN A LARGE SCALE FLOTATION CELL
Soria, J. NUMERICAL INVESTIGATION OF THE COLD SPRAY PROCESS
Specht, E. NUMERICAL ANALYSIS OF THE HEAT TRANSFER IN THE WALL OF ROTARY KILN USING FINITE ELEMENT METHOD ANSYS
Srivatsan, R. CFD STUDY OF SLURRY HOMOGENIZER
Stephens, D.W. TURBULENCE MODEL ANALYSIS OF FLOW INSIDE A HYDROCYCLONE SURROGATE BASED SENSITIVITY ANALYSIS OF PROCESS EQUIPMENT CFD MODELLING OF FLOATING AND SETTLING PHASES IN SETTLING TANKS EVALUATION OF TWO-EQUATION TURBULENCE MODELS IN A LABORATORY-SCALE THICKENER FEEDWELL
Sun, W.H. LOW REYNOLDS NUMBER UNSTEADY AERODYNAMIC CHARACTERISTICS OF FLAPPING CORRUGATED AIRFOIL NUMERICAL STUDY ON THE EFFUSION COOLING PERFORMANCE OVER THE WALLS OF AN ANNULAR BURNER
Sun, Z. RESTRICTED REGIONS OF RAYLEIGH-BÉNARD-MARANGONI CONVECTION IN SOLUTE TRANSFER BETWEEN GAS-LIQUID PHASES
Šutalo, I.D. MULTISCALE MODELLING OF CEREBRAL BLOOD FLOW
Syrjänen, J. PARTICLE VELOCITY AND CONCENTRATION PROFILES OF SAND - WATER SLURRY IN STIRRED TANK - MEASUREMENTS AND MODELLING
Back to Top
Tabib, M. CFD SIMULATION OF A SOLVENT EXTRACTION PUMP MIXER UNIT: EVALUATING LARGE EDDY SIMULATION AND RANS BASED MODELS
Tadé, M.O. CHARACTERIZING LIQUID FILM THICKNESS IN SPINNING DISC REACTORS
Tadulan, E. CFD MODELLING OF PULVERIZED COAL COMBUSTION IN A ROTARY LIME KILN
Tai, C.H LOW REYNOLDS NUMBER UNSTEADY AERODYNAMIC CHARACTERISTICS OF FLAPPING CORRUGATED AIRFOIL
Takeuchi, E. MULTI-PHYSICS ANALYSIS FOR ELECTROMAGNETIC PROCESSING IN CONTINUOUS CASTING OF STEEL BY FINITE VOLUME METHOD APPROACH
Tanaka, M. CFD MODELLING OF ARC WELDING - THE IMPORTANCE OF THE ARC PLASMA
Tang, Y. TWO-PHASE FLOW ANALYSIS AND EXPERIMENTAL INVESTIGATION OF MICRO-PIV FOR EMITTER MICRO-CHANNELS
Taniguchi, S. FORMATION OF UNIFORMLY-SIZED DROPLETS FROM CAPILLARY JET BY ELECTROMAGNETIC FORCE
Tashiro, S. CFD MODELLING OF ARC WELDING - THE IMPORTANCE OF THE ARC PLASMA
Taylor, J.A. VALIDATION OF SPH PREDICTIONS OF OXIDE GENERATED DURING Al MELT TRANSFER
Taylor, W. ENHANCED PROBLEM SOLVING; THE INTEGRATION OF CFD AND OTHER ENGINEERING APPLICATIONS
Tedford, N. ENHANCED PROBLEM SOLVING; THE INTEGRATION OF CFD AND OTHER ENGINEERING APPLICATIONS
Thakre, S.S. PERFORMANCE IMPROVEMENT OF ALUMINA DIGESTERS
Thompson, M.C. A QUASI-TWO-DIMENSIONAL INVESTIGATION OF UNSTEADY TRANSITION IN SHALLOW FLOW PAST A CIRCULAR CYLINDER IN A CHANNEL
Thorpe, G.R. FLOW MODE CHARACTERISATION OF LIQUID FILMS FALLING ON HORIZONTAL PLAIN CYLINDERS
Tian, Z.F. NUMERICAL MODELLING OF BROWN COAL COMBUSTION IN A TANGENTIALLY-FIRED FURNACE
Tierney, C. COMPUTATIONAL FLUID DYNAMICS MODELLING OF POROUS BURNERS
Tiitinen, J. MAPPING OF COLLISION REGIMES IN FLOTATION MODELLING
Tisdale, D. COMPUTATIONAL FLUID DYNAMICS MODEL OF ELECTRIC FURNACE FOR SMELTING NICKEL CALCINE
Toh, T. MULTI-PHYSICS ANALYSIS FOR ELECTROMAGNETIC PROCESSING IN CONTINUOUS CASTING OF STEEL BY FINITE VOLUME METHOD APPROACH
Töyrä, S. CFD-MODELLING OF SELECTIVE NON-CATALYTIC REDUCTION OF NOx IN GRATE-KILN PLANTS CFD MODELLING OF THE FLOW THROUGH A GRATE-KILN KILN AERODYNAMICS VISUALISATION OF MERGING FLOW BY USAGE OF PIV AND CFD
Trujillo, F.J. CFD MODELLING OF THE ACOUSTIC STREAMING INDUCED BY AN ULTRASONIC HORN REACTOR
Tu, J.Y. DIRECT QUADRATURE METHOD OF MOMENTS FOR ISOTHERMAL BUBBLY FLOWS AN OVERALL ASSESSMENT OF ABND MODEL FOR LARGE-SCALE BUBBLY FLOWS EXTERNAL CHARACTERISTICS OF SPRAY ATOMISATION FROM A NASAL SPRAY DEVICE MODELLING SUBMICRON AND MICRON PARTICLE DEPOSITION IN A HUMAN NASAL CAVITY INFLUENCE OF DRAG FORCES OF A SWARM OF BUBBLES IN ISOTHERMAL BUBBLY FLOW CONDITIONS EFFECT OF PARTICLES IN A TURBULENT GAS-PARTICLE FLOW WITHIN A 90° BEND UNSTEADY PARTICLE DEPOSITION IN A HUMAN NASAL CAVITY
Tukovic, Ž. SIMULATION OF OFFGAS SCRUBBING BY A COMBINED EULERIAN-LANGRANGIAN MODEL
Turan, O.F. CFD DESIGN OF A GENERIC CONTROLLER FOR VORTEX-INDUCED RESONANCE PREDICTING ENERGY DISSIPATION CHARACTERISTICS OF A TUMBLING GRANULAR-FLOW DAMPER USING DEM A FINITE ELEMENT BASED PREDICTION MODEL TO CONTROL LIQUID SLOSHING WITH CONTAINER FLEXIBILITY FLOW MODE CHARACTERISATION OF LIQUID FILMS FALLING ON HORIZONTAL PLAIN CYLINDERS PREDICTING THE DYNAMIC STRUCTURAL RESPONSE CONTROLLED BY A SLOSHING ABSORBER USING SPH
Tveit, H. MODELLING THE TAPPING OF SILICON MELT FROM THE SUBMERGED ARC FURNACES
Back to Top
Umezu, M. HEMODYNAMIC SIMULATION FOR CONGENITAL HEART DISEASE
Utikar, R.P. CHARACTERIZING LIQUID FILM THICKNESS IN SPINNING DISC REACTORS
Back to Top
Valla, A. INERTISATION OF HIGHWALL MINING TO CONTROL METHANE CONCENTRATIONS AT THE MOURA MINE
Versteeg, C. A CFD MODEL FOR SIMULATING HIGH PRESSURE THERMAL (HPT) PROCESSING - IMPACT OF MATERIAL PROPERTIES AND PROCESSING CONDITIONS ON PREDICTION ACCURACY
Vince, A. MODELLING THE MULTIPHASE FLOW IN DENSE MEDIUM CYCLONES
Vitankar, V. CFD STUDY OF SLURRY HOMOGENIZER
Vun, S. INVESTIGATION OF ELECTROSTATIC PRECIPITATOR CHAR COLLECTOR DESIGNS USING COMPUTATIONAL FLUID DYNAMICS
Back to Top
Wang, B. MODELLING THE MULTIPHASE FLOW IN DENSE MEDIUM CYCLONES
Wang, W. CHOOSING THE MESH-INDEPENDENT SUB-GRID DRAG COEFFICIENT MODEL
Warnica, D. ENHANCED PROBLEM SOLVING; THE INTEGRATION OF CFD AND OTHER ENGINEERING APPLICATIONS
Wegener, M. 2D SIMULATIONS OF INTERFACIAL INSTABILITIES AT DEFORMABLE SINGLE DROPLETS
Wehrstedt, K.D. PREDICTION OF BURNING RATE OF AN ACCIDENTALLY RELEASED FLAMMABLE FUEL BY MEANS OF CFD SIMULATION
Wei, J.J. NUMERICAL SIMULATION OF MAGNESIUM PRODUCTION BY THE PIDGEON PROCESS PART I: A NEW MODE FOR MAGNESIUM REDUCTION PROCESS IN A HORIZONTAL RETORT NUMERICAL SIMULATION OF MAGNESIUM PRODUCTION BY THE PIDGEON PROCESS PART II: COUPLING OF THE MAGNESIUM REDUCTION IN THE RETORTS WITH THE SURROUNDING THERMAL-FLOW FIELDS IN A COAL-FIRED FURNACE
Wei, Z. TWO-PHASE FLOW ANALYSIS AND EXPERIMENTAL INVESTIGATION OF MICRO-PIV FOR EMITTER MICRO-CHANNELS
Wels, H. SIMULATION OF THE FILLING OF POLYETHYLENE- TEREPHTHALATE- BOTTLES (PET) WITH A VOLUMETIC SWIRL CHAMBER VALVE (VODM 40355) ON THE BASIS OF CALCULATION MODELS AND EXPERIMENTS
Wheatley, V. GRID CONVERGENCE STUDY FOR A TWO-DIMENSIONAL SIMULATION OF FLOW AROUND A SQUARE CYLINDER AT A LOW REYNOLDS NUMBER
White, R.B. COMBINED EXPERIMENTAL AND SIMULATION (CFD) ANALYSIS ON PERFORMANCE OF A HORIZONTAL TUBE REACTOR USED TO PRODUCE CARBON NANOTUBES
Wick, T.M. BIOREACTOR DEVELOPMENT FOR CARTILAGE TISSUE ENGINEERING: COMPUTATIONAL MODELLING AND EXPERIMENTAL RESULTS
Wierink, G. MAPPING OF COLLISION REGIMES IN FLOTATION MODELLING
Wierzba, I. MODELING THE REACTIVE PROCESSES WITHIN A CATALYTIC POROUS MEDIUM
Witt, P.J. CFD SIMULATION OF FREE SURFACE FLOW AND HEAT TRANSFER OF LIQUID SLAG ON A SPINNING DISC FOR A NOVEL DRY SLAG GRANULATION PROCESS NUMERICAL MODELLING OF BROWN COAL COMBUSTION IN A TANGENTIALLY-FIRED FURNACE
Wójcik, J. CFD SIMULATION OF A CONICAL-CYLINDRICAL CRYSTALLIZATION UNIT USING MULTI-PHASE EULERIAN MODEL
Wood, S. COMPUTATIONAL FLUID DYNAMICS MODELLING OF POROUS BURNERS
Wu, C.Y. NUMERICAL STUDY ON THE EFFUSION COOLING PERFORMANCE OVER THE WALLS OF AN ANNULAR BURNER
Wu, J. SLURRY EROSION IN COMPLEX FLOWS: EXPERIMENT AND CFD
Back to Top
Xia, F. THE 3-D SIMULATION WITH DETAILED CHEMICAL KINETICS OF THE TURBULENT COMBUSTION IN A PRE-CHAMBER INDIRECT INJECTION DIESEL ENGINE
Xie, D. CFD SIMULATION OF FREE SURFACE FLOW AND HEAT TRANSFER OF LIQUID SLAG ON A SPINNING DISC FOR A NOVEL DRY SLAG GRANULATION PROCESS
Back to Top
Yamamoto, K. CFD MODELLING OF ARC WELDING - THE IMPORTANCE OF THE ARC PLASMA
Yamamura, K. MULTI-PHYSICS ANALYSIS FOR ELECTROMAGNETIC PROCESSING IN CONTINUOUS CASTING OF STEEL BY FINITE VOLUME METHOD APPROACH
Yang, N. A CONCEPTUAL MODEL FOR GAS-LIQUID INTERACTION AND ITS INTEGRATION INTO CFD SIMULATION OF BUBBLE COLUMNS
Yang, W. DEVELOPMENT OF BUBBLE DRIVEN FLOW CFD MODEL APPLIED FOR ALUMINIUM SMELTING CELLS EXTERNAL CHARACTERISTICS OF SPRAY ATOMISATION FROM A NASAL SPRAY DEVICE EFFECT OF PARTICLES IN A TURBULENT GAS-PARTICLE FLOW WITHIN A 90° BEND NUMERICAL PREDICTION OF AIR FLOW IN SHARP 90° ELBOW CFD SIMULATION OF A SOLVENT EXTRACTION PUMP MIXER UNIT: EVALUATING LARGE EDDY SIMULATION AND RANS BASED MODELS NUMERICAL MODELLING OF BROWN COAL COMBUSTION IN A TANGENTIALLY-FIRED FURNACE
Yang, Y. COUPLED DEM - CFD MODELLING OF THE IRONMAKING BLAST FURNACE
Yeoh, G.H. DIRECT QUADRATURE METHOD OF MOMENTS FOR ISOTHERMAL BUBBLY FLOWS AN OVERALL ASSESSMENT OF ABND MODEL FOR LARGE-SCALE BUBBLY FLOWS INFLUENCE OF DRAG FORCES OF A SWARM OF BUBBLES IN ISOTHERMAL BUBBLY FLOW CONDITIONS
Yu, A.B. MODELLING THE MULTIPHASE FLOW IN DENSE MEDIUM CYCLONES CFD-DEM MODELLING OF GAS FLUIDIZATION OF PARTICLE MIXTURES WITH SIZE AND DENSITY DIFFERENCES SIMULATION OF LIQUID-SOLID FLOW IN A COAL DISTRIBUTOR: INHOMOGENEOUS MODEL VS HOMOGENEOUS MODEL COMPUTATIONAL STUDY OF HEAT TRANSFER IN BUBBLING FLUIDIZED BEDS WITH GELDART A POWDER NUMERICAL SIMULATION OF GAS FLOW IN AN ELECTROSTATIC PRECIPITATOR CFD-DEM SIMULATION OF GAS FLUIDIZATION OF ELLIPSOIDAL PARTICLES
Yu, H.T. LOW REYNOLDS NUMBER UNSTEADY AERODYNAMIC CHARACTERISTICS OF FLAPPING CORRUGATED AIRFOIL
Back to Top
Zhang, K. MODELLING SUBMICRON AND MICRON PARTICLE DEPOSITION IN A HUMAN NASAL CAVITY
Zhang, H.J. EFFECT OF PARTICLES IN A TURBULENT GAS-PARTICLE FLOW WITHIN A 90° BEND
Zhang, S.J. NUMERICAL SIMULATION OF MAGNESIUM PRODUCTION BY THE PIDGEON PROCESS PART II: COUPLING OF THE MAGNESIUM REDUCTION IN THE RETORTS WITH THE SURROUNDING THERMAL-FLOW FIELDS IN A COAL-FIRED FURNACE NUMERICAL SIMULATION OF MAGNESIUM PRODUCTION BY THE PIDGEON PROCESS PART I: A NEW MODE FOR MAGNESIUM REDUCTION PROCESS IN A HORIZONTAL RETORT
Zhou, J.W. CFD SIMULATION OF GAS-LIQUID FLOW IN A LARGE SCALE FLOTATION CELL
Zhou, L.X. DEVELOPING MULTIPHASE AND REACTING TURBULENCE MODELS
Zhou, Z.Y. CFD-DEM SIMULATION OF GAS FLUIDIZATION OF ELLIPSOIDAL PARTICLES COMPUTATIONAL STUDY OF HEAT TRANSFER IN BUBBLING FLUIDIZED BEDS WITH GELDART A POWDER
Zhu, S.J. NUMERICAL SIMULATIONS OF BUBBLE DISPERSION OVER A HYDROFOIL
Zou, R.P. CFD-DEM SIMULATION OF GAS FLUIDIZATION OF ELLIPSOIDAL PARTICLES
Back to Top